Adcon A720 Guia do Utilizador descarregar pdf (Página 38)

addVANTAGE Pro 6.4 Administrator Guide CHAPTER 4

Node Properties

If you disconnect an RTU or tag on the DACQ Info tab, you will need to right-

click the node in the Explorer and select Connect To

hostname. Then select the

device in the dialog that appears.

When a tag is acquiring data, the icon for the tag and for the RTU will display in

the Explorer with a tiny moving arrow.

Tag Threshold Properties

Use the Thresholds tab (Figure 36) to set conditions that will trigger an alarm,

event or service log entry when a threshold has been reached.

Figure 36. Thresholds Tab of Tag Properties Dialog

One of the actions you can set on the Action tab is for the Threshold reached

event. Use the Thresholds tab to create the threshold that causes the action to

occur, as detailed in the following steps:

1. Select whether to Create “Threshold reached” event when” one of these

choices is true:

• ALL conditions were met

• ANY condition was met

2. Add one or more conditions:

a. In the Conditions pane, click Add.

The dialog shown in Figure 37 is displayed.

Figure 37. Adding a Threshold Condition

b. Click the Condition dropdown to select the threshold’s condition.

Following are the choices in this dropdown:

• is greater than

• is greater or equal to

• is equal to

• is less or equal to

• is less than

• is between (incl)

The values are inclusive.

• is between (excl)

The values are exclusive.

• is between (incl - excl)

The values include the first but exclude the last.

• is between (excl - incl)

The values exclude the first but include the last.

c. In the Value1 field, enter the condition’s value.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 104 105

Sem comentários

Adcon A720 Guia do Utilizador Página 38